So you have moved into your new condo and you find that your floor is not so good. Along these lines, you choose to remove the old floor tiles and put in new ones. Be that as it may, be careful Fired tile establishment is not as simple as it looks. So before you start removing anything from the floor, take a couple and get familiar with what you have to get ready for, when beginning on introducing your new artistic tiles. Here are three extraordinary tips on what to get ready for when arranging your earthenware tile establishment:

 Identify what sort of floor you have – or rather, your subfloor. Knowing the sort of subfloor you will be setting your clay tiles over is significant. There are three principle sorts of floors or, subfloors that you may experience, when beginning your clay tile establishment:

• A solid floor – Working artistic tiles over a solid subfloor is the best, however you need to check and clean it of garbage before you start. All the splits and gaps should be fixed and filled in before your clay tile establishment can begin. When your beginning chipping away at your undertaking, every one of your fired individual tiles will be fortified legitimately to the solid floor. In the event that the splits enlarge, this will influence your tiles, too. A few splits may even be that enormous that it is ideal to supplant the Tile Installation areas of your solid floor as opposed to fixing up all the breaks. On the off chance that you have a ton of enormous splits, particularly ones that run up the divider, counsel an authority before your beginning dealing with your tiling venture.
• A pressed wood subfloor. In case you are moving into a second floor condo, in all likelihood you are subfloor will be in pressed wood. Since you will put earthenware tiles over wood, your plywood subfloor must be basically solid and fit for supporting your clay tile establishment. Your compressed wood floor must be at any rate 1/8 inch thick, and bolstered by a similarly solid underlayment underneath it. Fired tiles are overwhelming and would require a subfloor that can bolster their joined weight. What’s more, they will become ousted or even break. Else, it is impulsive to do an earthenware tile establishment on wood.
• A current earthenware tile floor. Clay tile floors would as a rule, require the new room inhabitant to rebuild. There are two choices for rebuilding a current tile floor: One, leave the tile floor set up and work your earthenware tile establishment straightforwardly over it; or two, evacuate the old tiles. On the off chance that the present tile floor is set over a mortar bed, the least demanding approach to expel them is utilizing an enormous level bladed etch and simply hammer away. Make certain to keep yourself secured.